Page 1 of 1

Ramshot TAC loads

PostPosted:Sun Jan 08, 2017 9:14 pm
by Mirlen
Am going to work up some loads for TAC, but looking at my Hornady book and the mfg website the data seems quite a bit different... both for Hornady bullets (55gr FMJ/BT w/c, 2267 is what I'm using) I don't have it in front of me but it seemed like the low from the powder mfg was near the top end of the Hornady loads. Thoughts? Anyone else using TAC?

Re: Ramshot TAC loads

PostPosted:Tue Jan 10, 2017 5:06 pm
by myopicvisionary
Never used Ramshot, sorry.

Re: Ramshot TAC loads

PostPosted:Wed Jan 11, 2017 12:17 am
by Mirlen
Western Powders says low of 23.2 max of 25.8 and Hornady says 21.5 and 24.7. Have some loaded at 22.5, 23, 23.2, 23.4, 23.6. Will probably load a couple more sets up to cover some of the gaps and look for pressure signs along the way.