Page 1 of 1
M&P Apex triggers.
PostPosted:Tue Jun 24, 2014 9:29 am
by Dugan
Anyone have this on theirs?
My 4.25" barrel 9mm isnt bad, but the new shield we picked up has a lot of grittyness in the trigger and catches it feels like, it also has a VERY heavy trigger. This has been causing a lack of precision when firing.
Anyone have this mod, or suggest it? Does it shorten the throw of the Shield?
Re: M&P Apex triggers.
PostPosted:Tue Jun 24, 2014 11:07 am
by laxplayer2
Re: M&P Apex triggers.
PostPosted:Tue Jun 24, 2014 11:47 am
by Owen
The grit could be leftovers from manufacturing. You said it is brand new? It might just need to be broken in for the trigger pull to lighten a bit.
Re: M&P Apex triggers.
PostPosted:Tue Jun 24, 2014 1:16 pm
by Dugan
Owen wrote:The grit could be leftovers from manufacturing. You said it is brand new? It might just need to be broken in for the trigger pull to lighten a bit.
Yea thats kind of what I was thinking.
I saw a few vids, but I was trying to get peoples thoughts on it that might have it. Is it worth it?
Re: M&P Apex triggers.
PostPosted:Tue Jun 24, 2014 2:20 pm
by Owen
Dugan wrote:Owen wrote:The grit could be leftovers from manufacturing. You said it is brand new? It might just need to be broken in for the trigger pull to lighten a bit.
Yea thats kind of what I was thinking.
I saw a few vids, but I was trying to get peoples thoughts on it that might have it. Is it worth it?
Understood. The shield I shot had a heavier trigger pull also and it was not new. I think small carry guns may just have a heavier trigger as part of their design philosophy.
Re: M&P Apex triggers.
PostPosted:Tue Jun 24, 2014 3:36 pm
by laxplayer2
Check to see if it is Massachusetts compliant ( shld be on the box or u may be able to reach it with the S/N) I read somewhere they mandate 10 lbs trigger . Verify with Viper on that he shld def know.
Re: M&P Apex triggers.
PostPosted:Tue Jun 24, 2014 4:38 pm
by Boots
Owen wrote:The grit could be leftovers from manufacturing. You said it is brand new? ....
Why would you be shooting a gun that hasn't been stripped down, flushed with solvent (I use WD-40), dried, and properly oiled/lubed?
That's the first thing I do with a 'new' gun ... pre-owned, or not.
"New from the factory" usually means coated with a rust-preventive, not clean and lubricated.