Delaware Open Carry
http://www.deloc.org/forums/

M&P Apex triggers.
http://www.deloc.org/forums/viewtopic.php?f=29&t=9861
Page 1 of 1

Author:  Dugan [ Tue Jun 24, 2014 9:29 am ]
Post subject:  M&P Apex triggers.

Anyone have this on theirs?

My 4.25" barrel 9mm isnt bad, but the new shield we picked up has a lot of grittyness in the trigger and catches it feels like, it also has a VERY heavy trigger. This has been causing a lack of precision when firing.

Anyone have this mod, or suggest it? Does it shorten the throw of the Shield?

Author:  laxplayer2 [ Tue Jun 24, 2014 11:07 am ]
Post subject:  Re: M&P Apex triggers.

Here you go.


http://youtu.be/GuVeqLc-ESU

Author:  Owen [ Tue Jun 24, 2014 11:47 am ]
Post subject:  Re: M&P Apex triggers.

The grit could be leftovers from manufacturing. You said it is brand new? It might just need to be broken in for the trigger pull to lighten a bit.

Author:  Dugan [ Tue Jun 24, 2014 1:16 pm ]
Post subject:  Re: M&P Apex triggers.

Owen wrote:
The grit could be leftovers from manufacturing. You said it is brand new? It might just need to be broken in for the trigger pull to lighten a bit.


Yea thats kind of what I was thinking.



I saw a few vids, but I was trying to get peoples thoughts on it that might have it. Is it worth it?

Author:  Owen [ Tue Jun 24, 2014 2:20 pm ]
Post subject:  Re: M&P Apex triggers.

Dugan wrote:
Owen wrote:
The grit could be leftovers from manufacturing. You said it is brand new? It might just need to be broken in for the trigger pull to lighten a bit.


Yea thats kind of what I was thinking.

I saw a few vids, but I was trying to get peoples thoughts on it that might have it. Is it worth it?

Understood. The shield I shot had a heavier trigger pull also and it was not new. I think small carry guns may just have a heavier trigger as part of their design philosophy.

Author:  laxplayer2 [ Tue Jun 24, 2014 3:36 pm ]
Post subject:  Re: M&P Apex triggers.

Check to see if it is Massachusetts compliant ( shld be on the box or u may be able to reach it with the S/N) I read somewhere they mandate 10 lbs trigger . Verify with Viper on that he shld def know.

Author:  Boots [ Tue Jun 24, 2014 4:38 pm ]
Post subject:  Re: M&P Apex triggers.

Owen wrote:
The grit could be leftovers from manufacturing. You said it is brand new? ....
Why would you be shooting a gun that hasn't been stripped down, flushed with solvent (I use WD-40), dried, and properly oiled/lubed?

That's the first thing I do with a 'new' gun ... pre-owned, or not.

"New from the factory" usually means coated with a rust-preventive, not clean and lubricated.

Page 1 of 1 All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/